Automatic Hot Melt Carton Sealer

HM11-T is an automatic case sealer with side drive belts and manual adjustment. It is designed to seal with Hot Melt glue the top of boxes of the same size.

The box, coming from a filling stationwith the bottom flaps sealed, is taken away by drive belts toward the machine where injectors dispense 4 strips of Hot Melt glue. A system of flap compression rollers provides the proper pressure on top flaps of boxes.

The Hot Melt case sealer doesn’t require the presence of an operator except for the glue adjustments and feeding. It is equipped with safety panels to prevent an operator from coming in contact with moving or hot parts.

Key Features

• Manual adjustment on the different box sizes (width,height,length) by handles
• Side drive belts (2 x 75 mm width each)
• 2 x Motors kW 0,18 each
• The top glue dispensing applicator dispenses the glue on the top flaps while boxes pass through the machine before the top flps folding

HM11-TB is an automatic case sealer with side drive belts and manual adjustment. It is designed to seal with Hot Melt glue the top and bottom of boxes of the same size.

The box, coming from a filling station with the bottom flaps sealed, is taken away by drive belts toward the machine where injectors dispense 4 strips of Hot Melt glue. A system of flap compression rollers provides the proper pressure on top and bottom flaps of boxes.

The Hot Melt case sealer doesn’t require the presence of an operator except for the glue adjustments and feeding. It is equipped with safety panels to prevent an operator from coming in contact with moving or hot parts.

Key Features

• Manual adjustment on the different box sizes (width,height,length) by handles
• Side drive belts (2 x 75 mm width each)
• 2 x Motors kW 0,18 each
• The top & bottom glue dispensing applicator dispenses the glue on the top and bottom flaps while boxes pass through the machine before the top flaps folding
• ROBATECH® Hot Melt glue dispenser on an external carriage with casters equipped with 5 Kg tank, tube and glue applicator included (other brands on request))
• The glue dispenser adjusts glue temperature & volume
• Storing of sealing programs
• Timer setting to allow pre-heating adjustment
• Box dimensions adjustment
• Side safety protections with stop emergency button and switches to disconnect electric & pneumatic circuits
• Control panel equipped with: main switch start, stop button, stop emergency button and photocells to control glued boxes passing
• Machine controlled by PLC

HM145 and HM146 are automatic case erectors with side drive belts and manual adjustment. They are designed to seal with Hot Melt glue the bottom of boxes. The operator, after having filled the box storage with boxes and adjusted the machine, turns “On” switch. The machine automatically takes a box from the boxes storage. A carriage drags the box which is automatically opened by a box-opener lever. Then the box is taken away by a second carriage through side drive belts to start the folding operations.

Key features of HM145:

• Box storage for 150 boxes
• Box storage available on left side (SX) or right side (DX)
• 2 carriages activated by a pneumatic system with suction cups to take cartons from the boxes storage, to fold and to take them away by drive belts (2 x Motors kW 0,55 each) for the bottom flaps folding & sealing with Hot Melt glue
• ROBATECH® Hot Melt glue dispenser positioned on an external carriage with casters (other brands on request)
• VENTURI® vacuum system
• Control panel equipped with: box counter box timer, low box storage alarm, glue end alarm, full line alarm after the machine
• Safety protections with switches to disconnect electric and pneumatic circuits if opened
• Machine controlled by PLC

HM145 and HM146 are automatic case erectors with side drive belts and manual adjustment. They are designed to seal with Hot Melt glue the bottom of boxes. The operator, after having filled the box storage with boxes and adjusted the machine, turns “On” switch. The machine automatically takes a box from the boxes storage. A carriage drags the box which is automatically opened by a box-opener lever. Then the box is taken away by a second carriage through side drive belts to start the folding operations.

Key features of HM145:

• Box storage for 150 boxes
• Box storage available on left side (SX) or right side (DX)
• 2 carriages activated by a pneumatic system with suction cups to take cartons from the boxes storage, to fold and to take them away by drive belts (2 x Motors kW 0,55 each) for the bottom flaps folding & sealing with Hot Melt glue
• ROBATECH® Hot Melt glue dispenser positioned on an external carriage with casters (other brands on request)
• VENTURI® vacuum system- Control panel equipped with: box counter - box timer, low box storage alarm, glue end alarm, full line alarm after the machine- Safety protections with switches to disconnect electric & pneumatic circuits if opened
• Machine controlled by PLC